← Back to News
Technical Guide

What to do after a metal detector alarm

Alarm is not proof

A metal detector alarm does not prove a product contains metal, and it does not mean the product can be waved through. Handling usually has three steps: confirm whether the alarm comes from the equipment itself, re-pass the suspect item through the detector one or more times, then decide on isolation, rework or release based on the result. Without a written procedure, each shift handles alarms by experience, and the risk hides in the gaps between practices.

Agree the re-check method

The re-check method should be agreed in advance. A common approach is to keep the suspect item in its original packaging state, pass it through repeatedly in a fixed orientation, and see whether the alarm repeats consistently. For products with moisture, salt or foil packaging, product effect can also cause false alarms. How many passes, which orientation, who operates and where results are recorded should all be written as workable clauses rather than left to the operator.

Set isolation boundaries

Isolation and release need clear boundaries. Products confirmed to contain foreign matter should be stored and labelled separately, and you should judge whether other items from the same batch need wider checking. Items that no longer alarm after re-checking should not simply be mixed back into normal stock; handle them by your own rules and keep records. Only when alarm logs, re-check records and disposal conclusions match does the loop truly close.

FAQ

If a suspect item no longer alarms on re-check, can it go back into normal stock?

Mixing it back is not advised. The article says such items should be handled by your own rules with records kept, so the disposal conclusion matches the physical status.

What is most often overlooked in alarm handling?

Traceability of records. Alarm logs, re-check records and disposal conclusions must match, otherwise later tracing and customer audits lack evidence.