Online weighing catches defects
A checkweigher is typically installed after the packaging or filling stage, weighing each product online and comparing it with a preset weight range. A reading below the lower limit often indicates a missing component, incomplete filling or underfill, while a reading above the upper limit may suggest overfilling, foreign matter or a packaging fault. Compared with manual sampling, online weighing covers every product, intercepts quality issues before shipment and provides continuous weight data for process capability analysis.
Setting accuracy and line speed
When selecting a unit, first clarify the required accuracy and line speed. Accuracy should be set according to product weight, permitted deviation and the smallest difference that must be detected; an unnecessarily high specification can make the system sensitive to vibration and air currents, causing false rejects. Throughput should match production capacity and take into account belt width, product spacing and rejection method. Ingress protection rating and the ability to connect with metal detectors or X-ray inspection equipment should also be assessed against the workshop environment and future expansion needs.
Verification and data traceability
After installation, routine maintenance and verification largely determine how well the equipment performs. Periodic static and dynamic checks with certified test weights are recommended, with deviation trends recorded; keep the weighing platform clean and belt tension stable, and reduce nearby vibration sources. Rejection devices should be tested regularly to confirm that non-conforming products are actually removed. Linking weight data to production batches supports traceability and process improvement, making the checkweigher a reliable part of production line quality control.